Proeye Communications & Security Systems Security Alarms LS-30
© Proeye Communications & Security Systems 2013
Dual technology 15 metre detector using both microwave and passive infrared (PIR) detection. This combination of technologies virtually eliminates false alarms but faithfully detects intruders. 15 metre wide angle PIR designed and made using the latest S.M.D. technology. onboard Pulse Count and sensitivity adjustments provide the flexibility to use the Quantum™ standard in most environments. The Bright White LED creates a low level light at nigh
Australian manufactured - NESS Indoor hard wired movement detectors
Dual Microwave + Infra-red
The wrieless temperature sensor can be placed in an area to monitor the enviromental temperature, including a freezer. The temperature is displayed on the LS-30 or transmitted via a data logger via the Ethernet optional interface.
Temp Sensor
$99
LS-30  7piece Set $699
Inquire Now More Info
LS-30  7piece set, GSM, Solar $1580
Inquire Now
Includes 2 Wireless PIR Setectors, 2 Remotes, and the LS-30 System including power supply.
LS-30  5 piece Set $499
Inquire Now
About the Alarm System: The LS-30 is a Wireless Security & Control (WSC) System, that is designed to provide advanced features to protect the home or business by detection of intruders, or certain events to reduce the risk of injury loss or harm. The system can be operated, and its status read, by using the proprietary ‘HyperSecureLink software’ via an internet connection, or the integrated keypad and visual display. The System can be also used as a home automation controller, allowing users to operate up to 15 programmable switches, by executing daily switching commands throughout the week. The system also has optional temperature, humidity, and other types of sensors, allowing users to control, monitor, or send alerts. Some applications the system can be used for are, monitoring environmental conditions including temperature, humidity, and sending alerts when detecting signals by various optional sensors gas leaks, smoke, water such as flood or leakage, power use etc. By using the on-board keyboard and visual display facilities to operate the system, the user must pay attention to the screen prompts while entering instructions and engaging by pressing the ‘YES/NO’ or the appropriate keys. The system may also be programmed from a PC using the optional USB/RS-232 adapter and HyperSecureLink software.
• Security and home automation • Optional IP or Serial interfaces to program, download, or upload system parameters and events • Interactive programming via 16 x 2 LCD display and keypad • Detailed 512-event log with time tag • 288 sensors/ zones can be accommodated • 16 programmable X-10 switches • Received RF (Radiofrequency) signal strength indicator and radio jamming detection • Radiofrequency coding and transmission design, improves security and reduces interference • Responds to panic, burglary, fire, medical alarm and environmental hazards • Burglar zones with supervised sensors, door and window open/ close detection • Monitoring feature to record all the activities in the protected area without triggering the alarm • 9 independent partial arm zones, one LS-30 can operate as 10 independent systems • A range of optional wireless sensors including, temperature, humidity, gas, smoke, water, to increase security and reduce risk of loss or harm. • Built-in voice dialler stores up to 10 phone numbers, 1 pager, 5 GSM numbers and 2 CMS data links • Pre-programmed voice message or recordable personal messages addressing events  alarms, fire, gas, • Hands-free speaker phone, two-way voice communication • Dial-in control of listen-in, 2-way communication, arm, disarm, event report and switch control • Latchkey function to inform parents when kids leave or return home • AC power loss and restore will inform the user by voice • Inactivity monitoring to take care of the elderly or physically challenged at home • Remote access, via the Internet by using the optional Ethernet Adaptor, or through PSTN via the Data Communication Module • Optional GSM, or Ethernet modules in case the telephone link fails
Includes 2 Wireless PIR Setectors, 2 Remotes, Solar Power system including 40 Watt solar panel, solar charger with GSM dialler pre installed in PVC sace and pre wired to the LS-30 System
DIY - LS-30  5 piece set, GSM, Complete Solar $1380
Battery operated Gas detector. Detectcs Liquiefied Natural Gas -LNG 8,000 ppm detection, and Liquefied Petroleum Gas - LPG 3,300 ppm Has 15 meter range, and 110 degree arc. Uses two AAA batteries that last up to two years, subject to 40 triggers per day. Supervised Photo-electric Type Smoke Detector, meets European EN146014, USA - UL217 Standards. Uses 9V alkaline battery and provides 1.1 years supervised operation and 1.5 years unsupervised operation. Connect to a power point near the base unit and with cable provided from the XM10 module to LS-30 base unit communicates via electrical cables in premises with appliance modules (AM12) and lamp modules (LM 12) to turn off or on. Times are programmable. Great for personal monitoring and emergency button. 12-15 VDC Operation, 25mA standby current, 120mA activated. Backup battery 30 hours standby. Siren output level approc 108 dB at 1 meter. Allows LS-30 Alarm to communicate across internet using Internet Protocol (IP) Remotely arm, disarm, set panic alarm, or set home mode.
Wireless Pet Immune  PIR Detector
Wireless Gas Detector
Wireless Emergency  Button Wristband
Ethernet Interface LS-30 Connect via internet
Wireless Smoke Detector
Wireless Internal  Siren
X10 Controller
Built in solar PV cell with battery to store energy up to 40 days without sunlight. Makes mounting simpler without necessity of cabling.
Solar Powered Wireless Outdoor Siren
Remoptely controlled by the LS-30 Alarm via the X10 Controller Wireless door or window switch. Battery life approx 3 years.
Wireless Reed Switch
2 * AAA Batteries providing up to 4 years operation. Has built in tamper switch.
Wireless Vibration Sensor
Mobile Network GSM Interface
The detector sends an alarm signal when the sensor prob is immersed in water.
Wireless Water Sensor
Sends an alarm signal when the glass break sensor detects the action of glass breaking.
Wireless Glass Break Sensor
Arm/Disarm Alarm, and control X10 peripherals
Wireless Keypad
X10 Lamp Switch
Remoptely controlled by the LS-30 Alarm via the X10 Controller
X10 Appliance Switch
About X10
4 Button Remote
Allows Alarm to communicate across COM1 port for programming etc.
USB Interface
$149
$68
$149
$89
$105
$99
$93
$120
$93
$90
$69
$390
$79
$55
$55
$96
$89
$29
The detector creates a 3 degree narrow beam, combines PIR and Microwave technology, has selectable detection sensitivity, is weather and water resistant, automatic temperature compensation, is processor controlled for better detection and false alarm redu Has Active Infrared Illumination, uses two PIR Pyro detectors, Microwave detection, has shock sensor, is PET immune, caopes in extreme temperature ranges from -30 to 60 degrees celcius, simply weather resistant.
Israeli Manufactured  - Maximum Security Products Indoor/Outdoor hard wired movement detectors
Outdoor Curtain Beam Detector
$239
$249
Movie Inquire Now
Infra-red + Bright White LED + Mounting Bracket and Optional PET Lens on order
$65
$99
Solar Power Kit, Includes  40 Watt Panel Solar Regulator Morning Star 12V DC 9AH Battery Plastic Housing
$520
LS-30 Additional Backup Battery
Coming Soon, AC Current Measurement
The LS-30 Wireless AC Current Clamp and Temperature sensor (TX-3AC is battery operated) can measure up to 100A in 50 or 60 Hz AC current with true RMS reading. The sensor can be placed almost anywhere to monitor + log current  and temperature data from its surrounding environment. The sensor can send an alarm signal for pre-set high or low temperature or current limits.
The detector is great for securing outdoor perimiters, windows, doors including bifold doors, sliders, etc. The formed beam dimensions are approximately 2 meters height by 0.53 wide. The beam distance is up to 10 meters.
Outdoor Detector PIR + Microwave
Consider hard wired peripherals for the LS-30, especial when securing large sheds, holiday homes, cabins and caravans, because the majority of the wireless peripherals rely on replaceable batteries. The hard-wired peripherals will source power from the LS-30.
Repeater
Features and Specifications
Home Digital TV Home theatre Fiber to the home White Papers & Discussions Satellite TV Galleries Security and CCTV Telecommunications Online payment Contact About Inquire Now